Home > Pond Liners & Underlayment > Liner Installation & Repair
Sort By:
Page of 1
Concrete Anchors for Termination Bar, 1-1/4"
List Price: $1.59
Our Price: $1.40
Savings: $0.19
QuickSeam Patch
List Price: $8.49
Our Price: $7.50
Savings: $0.99
Silicone Sealant, 2.8 oz.
List Price: $8.99
Our Price: $7.50
Savings: $1.49
Use for anchoring termination bars to concrete. Attach every other hole when anchoring above water or every hole when anchoring under water. A 6” diameter circular patch with adhesive backing for quick repair of small cuts and punctures in your Liner. This 100% silicone sealant is ideal for all types of uses when a water tight seal is needed.  Ideal for use when attaching faceplate to skimmers and the stone lip on the AquaFalls filters.
MultiVent, End Cap
MultiVent, End Cap
Our Price: $11.00
Sale Price: $8.00
Savings: $3.00
QuickScrubber Tool
List Price: $13.89
Our Price: $11.00
Savings: $2.89
Water Block, 10 oz. Tube
List Price: $18.79
Our Price: $12.00
Savings: $6.79
This product is an End Cap used to terminate a line of Multi-Vent. This tool is used to clean and prepare the seam area of the EPDM liner and apply the QuickPrime Adhesive prior to installation of the tape.  3 pads are included. Water Block is a butyl based product used to create a compression seal between liner and the substrate under the liner. Ideal for use between liner and concrete.
Lap Sealant, 11 oz tube
List Price: $17.09
Our Price: $15.00
Savings: $2.09
MultiVent, Coupling
Our Price: $19.00
Sale Price: $16.00
Savings: $3.00
MultiVent, End Outlet to 3" Pipe
Our Price: $19.00
Sale Price: $16.00
Savings: $3.00
A rubber based sealant used to seam exposed membrane edges to provide additional waterproofing protection. It can also be used as a quick applied sealant to repair punctures to PondGard membrane.

This product is a coupling designed to attach 2 pieces of Multi-Vent.

This product transitions Multi-Vent to a 3" pipe for drainage beyond liner.
3" QuickSeam Splice Tape (2-sided), 10' roll
List Price: $19.89
Our Price: $18.00
Savings: $1.89
Aluminum Termination Bar, 10'
List Price: $20.39
Our Price: $18.00
Savings: $2.39
6" QuickSeam Splice Tape (2-sided), 10' roll
List Price: $28.79
Our Price: $26.00
Savings: $2.79
This 3” wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape. Use these anytime that EPDM Liner needs to be securely attached to concrete, wood, steel, etc.  Bar is pre-punched for easy attachment. This 6” wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape.
Liner Repair & Seaming Kit
List Price: $35.49
Our Price: $27.00
Savings: $8.49
MultiVent, 4 way Y
Our Price: $36.00
Sale Price: $31.00
Savings: $5.00
QuickSeam Cover Tape (1-sided), 10' roll
List Price: $39.99
Our Price: $36.00
Savings: $3.99
This handy kit includes the super strong QuickPrime adhesive, which was previously only available in a 1 gallon container.  It comes complete with two 6”x6” liner patches, a two ounce bottle of QuickPrime, roller, scrubber pad, disposable gloves and instructions for making a repair. This product is a 4 way "Y" designed to split Multi-Vent into 3 branches to cover larger areas under liners. This 6” wide adhesive tape is factory laminated to an EPDM membrane that is used to seam two pieces of PondGard liner together.
QuickPrime Adhesive, 1 quart
List Price: $40.99
Our Price: $36.00
Savings: $4.99
3" QuickSeam Splice Tape (2-sided), 25' roll
List Price: $42.79
Our Price: $38.00
Savings: $4.79
Seam Roller
List Price: $54.29
Our Price: $44.00
Savings: $10.29
This product is an absolute must when joining together 2 pieces of EPDM liner.  Use a QuickScrubber tool to apply to liner, let dry to touch and then apply tape.  This product dramatically improves bonding of tape to liner. This 3” wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape. One of the critical steps in a good liner seam is to apply heavy pressure to the seam area to properly fuse the tape to the liner. These commercial grade rollers are perfect for that task and the silicone roller will not stick to tape or liner.
Pipe Boot
List Price: $64.99
Our Price: $56.00
Savings: $8.99
QuickSeam Tape Kit
List Price: $123.49
Our Price: $107.00
Sale Price: $59.00
Savings: $64.49
6" QuickSeam Splice Tape (2-sided), 25' roll
List Price: $70.79
Our Price: $61.00
Savings: $9.79
This pipe boot is a great way to make a waterproof penetration through a liner.  It can be cut to fit pipes from 1” to 6-7/8” OD.  Rubber boot has taped flange that bonds to liner and a stainless steel clamp that tightens around pipe.  For best seal, use with QuickPrime adhesive. A complete system for seaming together panels of PondGard liner in order to form larger ponds.  Each kit contains 2 ea 4 oz cans of QuickPrime, 25’ of QuickSeam Splice Tape, QuickSeam Application Tool (handle and pads), Crayon, Roller, Wipes and Complete Installation Instructions. This 6” wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape.
MultiVent, 25' roll
Our Price: $79.00
Sale Price: $64.00
Savings: $15.00
3" QuickSeam Splice Tape (2-sided), 50' roll
List Price: $75.79
Our Price: $70.00
Savings: $5.79
QuickPrime Adhesive, 1 gallon
List Price: $86.29
Our Price: $74.00
Savings: $12.29
Multi-Vent Underliner System is a patented, innovative and cost effective system designed to protect pond and lagoon liners from damage caused by methane gas and water accumulation beneath the liner. This 3” wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape. This product is an absolute must when joining together 2 pieces of EPDM liner.  Use a QuickScrubber tool to apply to liner, let dry to touch and then apply tape.  This product dramatically improves bonding of tape to liner.
QuickSeam Cover Tape (1-sided), 25' roll
List Price: $91.99
Our Price: $84.00
Savings: $7.99
6" QuickSeam Splice Tape (2-sided), 50' roll
List Price: $113.69
Our Price: $104.00
Savings: $9.69
QuickSeam Cover Tape (1-sided), 100' roll
List Price: $326.39
Our Price: $299.00
Savings: $27.39
This 6” wide adhesive tape is factory laminated to an EPDM membrane that is used to seam two pieces of PondGard liner together. This 6” wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape. This 6” wide adhesive tape is factory laminated to an EPDM membrane that is used to seam two pieces of PondGard liner together.